Would you like to have a lush, perfectly manicured lawn? Are you tired of that surface sprinkler that cannot occupy all the points of your garden? Tired of having to water your bloom and plants with a garden hose? If you’re looking to have the best grass on the block, it might be time to install a sprinkler system.
Installing a sprinkler system will cost between $ 3,000 and $ 4,000 for a ¼ acre lot. If you buy the components and materials and do it yourself, you can expect to spend around $ 1,500 and spend a lot of time setting up everything in your garden.
If you’re thinking about putting in a sprinkler gadget on your garden, right here are 5 suggestions to remember earlier than you begin.
Know what is involved
Installing an irrigation system is not easy. There are many steps involved, and there is much more than digging holes and staggering sprinklers throughout the yard. Before you begin, take some time to learn about the process so that you know what you are getting into. If you start the project and end up having to hire a professional to fix and finish it for you, it could end up costing more money than hiring a professional upfront.
Installing a sprinkler system involves digging trenches, connecting your system to the main water line, and laying PVC pipes underground. You will also need to assemble the various parts of the irrigation kit, run all kinds of tests, and connect the control box to turn on your sprinklers. When connecting your system to a power source, you will also need to install a timer to control how long and how often you want your sprinklers to run. In addition, you will need to install drains, valves, and other protective measures.
You will also want to take into account the fact that certain areas of your lawn may require more water than others. Installing a sprinkler system is a big job, so make sure you fully understand the process before you begin.
Take the time to plan
If you are confident that you can handle the job yourself, take the time to plan your system properly. Having a solid plan in place is step one, long before choosing your actual system or digging your lawn. Start through searching for boundaries and trouble regions around your lawn. If you have a lot of slopes or hills, you can expect a higher level of difficulty than if you have a flat yard.
Contact your water company for the scope of your system. You will require to know the water pressure, flow rate, and system capacity before buying a sprinkler system. This is important as you will need to buy one that your water system can handle. Another important step is to map the entire project. The water from each spray head must overlap. If you separate them too far, you will end up with areas that won’t get the water they need.
Check valuable lines
Whatever you do, don’t just snatch a shovel and begin digging. Before starting your project, contact your utility companies. Ask them to come to your property and mark your underground lines. This is extremely important! If you don’t know where the electrical, cable, and phone lines are, you can cut them into one. The last thing you want to do is cause an even bigger problem that will require hiring a professional to fix it.
Get a permit
Before starting your project, check if you want a permit. Depending on where you live, a permit may be required prior to installation. In some cities and counties, the irrigation system installation may not be a DIY project. Every county and state has different rules and regulations, so know what the law requires of you before you start digging your lawn.
In addition to needing a permit, it is also important to know what the building codes are in your neighborhood. There are many small details that you will need to pay attention to, such as how deep to dig to prevent the water lines from freezing.
If you live in a city that will permit you to DIY your sprinkler system, you may be required to have a licensed plumber connect your system to your home water system or water supply. Know the rules and regulations in your town to avoid fines, fees, and legal consequences.
Hire a professional
While DIYing your sprinkler system can save you thousands of dollars, it is not a simple project to do. This is a domestic mission this is normally nice left to the professionals.
If you feel like you are not up to the job or can’t do the heavy lifting required, hire a professional. A professional will know exactly how to get the job done and will take the time to plan, get permits, install and test the system properly.
Another cause to hire a professional is that the work may come with a guarantee. If you buy a sprinkler system and install it yourself, you may lose your warranty benefits.
Find a licensed and licensed contractor in your city to do the job for you. Depending on the installer and system you buy, you can get the added benefit of having a warranty to protect you in case something goes wrong.
Is it simple to establish a sprinkler system?
Sprinkler system installation is hard work and there is a lot more to it than you might think. Mapping where the sprinklers will go is the easy part. Digging trenches, laying pipes, connecting to water supply lines, and protecting your system with shut-off valves are much more complicated aspects of the job.
If you have the time and skills to do it yourself, do it. But when in doubt, do yourself a favor and hire a professional.